Zincir 08B (1mt)
373,48 TL
With installments starting from 35,29 TL !!
You can buy it with installment options .
Specify the Number of Chain Rows in the "Options" section.
Priced per 1 meter .
You can fill out the contact form or call customer service for chains in special sizes.
Chains:
Although chains are used for many purposes, they are most commonly used to transmit power, carry materials on conveyors and in lifting vehicles.
They are used for three basic purposes: load carrying.
Power transmission:
Chains transmit movement synchronously. For this reason, it is an alternative to synchronous belts in applications with synchronous movement.
Timing belts are preferred for medium and small powers, and chains are preferred for large powers. Inertia, multi-part
They cannot be used at very high speeds due to their structure and inability to transmit full uniform motion. Noisy at high speeds
and they work vibrating. For this reason, the first movement from the engine is never taken with the chain. A reducer, belt-pulley or
Chains can be used after reducing the speed with another system. The speed at which it can be used depends on the chain length.
It is relevant. As the chain length gets shorter, there is a chance to use it at higher speeds.
Transmission chains:
The main advantage of chains in synchronous movement is that they can be used as a carrier system in conveyors. In chains
A wide variety of automation applications can be easily realized through ears installed at equal intervals. Only
or mostly two chains are used to move objects (products) synchronously. Applying chain ears
It can be made in a variety of ways depending on the type. The most suitable ear type is selected from the manufacturer's catalog and the pitch given by the manufacturer is applied.
It is requested to place and ship at intervals. In systems consisting of two chains, the chains are usually attached to ears with a thin shaft.
are connected to each other with the help of The product is pushed through this thin shaft.
In conveyor applications, the chain is moved on a surface or in a channel. This channel or surface provides both bearing and bearing for the chain.
It also provides guidance.
The most commonly used form of transmission and conveyor chains are roller chains. Roller chains can be single or
It can be very sequential. Chain pitch spacings are generally according to the inch system. (such as 1/2” (12.7 mm)). In the same pitch range
There are chains of different sizes. For this reason, the number of pitch and rows alone is not decisive and the standard of the selected chain
number should also be stated.
Forklift chains:
Specially designed chains are used for load carrying applications. These chains can carry large loads due to their structure.
Harika
Başarılı
g... g... | 28/11/2019
RECOMMENDED PRODUCTS
89,02 TL
139,33 TL
19,35 TL
29,03 TL