Timing Gears - Timing Pulleys
It is similar to chain mechanisms in terms of its working principle, as it carries out motion transmission in a closed manner. In terms of materials, it is similar to belt-pulley mechanisms.
Features of Timing Gears:
- The conversion rate is fixed. The movement can be precisely synchronized as desired.
- Does not require lubrication.
- It gets very little hot during operation,
- It works noiselessly.
- Allows the use of very small diameter gears.
Where Are Timing Gears Used?
- In places where precise position control is required, in systems where motors such as stepper motors and servo motors are used,
- In the crankshaft that turns the valves in automobiles, while transmitting power to the shafts that must rotate with precise time adjustment,
- In cases where a gap is not desired, such as in the chain and sprocket,
- When the shafts need to rotate precisely at the same speed in places where speed control is made with a motor,
- When it is desired that there will be no scrolling when the rotation movement suddenly stops,
- In conveyor systems, in belt systems where products must be transported,
- In machines where rust is not desired and used in the medical field or food field,
- In cases where slippage is not desired at high speeds (5-10m/s),
2.110,56 TL
730,14 TL
781,48 TL
889,86 TL
946,90 TL
1.112,32 TL
1.163,66 TL
1.277,75 TL
1.391,83 TL
1.557,25 TL
1.665,63 TL
2.384,37 TL
4.209,72 TL
3.319,86 TL
5.202,25 TL
6.696,76 TL
7.860,42 TL
889,86 TL
946,90 TL
1.055,28 TL
1.163,66 TL
1.329,08 TL
1.500,21 TL
1.774,01 TL
1.939,44 TL
1.608,59 TL
2.110,56 TL
2.441,41 TL
2.829,30 TL
3.878,87 TL